Tesco Cheese Biscuits Wedge PSU Re-Cap


Power supply off the Wedge lid, and the board now out of the PSU case. It takes a bif of faff, including unclipping the four spade connectors coming from the mains cord, unscrewing the earth and all the other screws from the case, pushing out of the auxiliary power connector, and cutting the tie-wrap holding the power lines to the PSU case. Then it's just possible to slide the board out of the case, the wrong way, as shown here, by going over the lip on the edge. It's easier to do this than sliding it out the right way, as the components on the board get in the way.



Click here to return to Tesco Cheese Biscuits Wedge PSU Re-Cap