The sideways ROM sockets are full in Station 130 - OS and BASIC to the left and right, two of my 32K sideways RAM modules inner left and right, and 32K ROM with DNFS and ADT in the middle. The three in the middle each need flying wires for various purposes.

The sideways RAMs need a write enable line feeding into them, out of view.

The ROM and RAM then each need a wire to enable both of the banks inside to show up inside the BBC ROM table. This is taken from IC76 and it's traditional to use a probe clip of some sort to make a moveable connection. Until these new grabbers arrived, I had alwaysed use probe hook clips like the black one shown, attached to the ROM chip.

The new grabber type clips are now on the two RAM modules, replacing hook clips used previously.

Click here to return to Station 130 New Sideways RAM Grabbers